Coverall selection: handling harmful substances
Chemicals do not differentiate. From the tops of our heads to the soles of our feet, every single millimetre of us can be damaged beyond repair if we are not properly protected against harmful chemicals and substances. It can be difficult to determine which chemical coveralls are right for your workplace, that’s why protective standards are in place.
在过去的几年中，澳大利亚有几起引人注目的事故引起人们对保护有害化学物质和物质的保护问题。人们受到了严重的伤害，并且死亡。Tragically, as some accidents have shown, workers have been injured because they didn’t have access to suitable personal protective equipment (PPE), and/or weren’t properly guided on correct procedures concerning the handling of harmful substances, including during spills and in clean-up operations.
Protection from harmful chemicals and substances requires a complete head-to-toe solution. This includes the use of PPE that meets relative standards, is appropriate for all individual hazards in the workplace and fits correctly. PPE includes face masks, eyewear, footwear and coveralls. There are many different types of coveralls, and it can be difficult to determine which type is right for the type of work and workplace. However, there are protective standards in place.
For a clearer image, click这里.
There are various types of coveralls to protect workers from a broad range of chemicals. Most workers will never need to look further than a type 5/6 coverall, to protect them from dry chemical powder and liquid droplets. The best way to ensure the correct coverall is selected is to compare the chemicals being used against a coverall permeation guide. No two workplaces are the same, so it’s best to engage with a technical safety specialist to ensure that the appropriate protective coverall is identified. A specialist can do the analysis of the chemicals being used with the coverall permeation data to select the correct coverall.
Protective coveralls undergo rigorous testing to ensure that they provide the correct level of protection. Different chemicals will ‘break through’ the coverall at different times, so it’s important to understand the permeation data and how they interact with specific environmental conditions. It’s the very reason why many overalls are disposable and should be replenished frequently. While there’s a lot of permeation data available, at the base level employers should familiarise themselves with the EN standards and types for guidance.
For a clearer image, click这里.
在为您的工作场所选择化学课程时，请确保它们在服装上标有EN标准。For example, a type 5/6 should display the pictograms for particles and liquid droplets along with EN 13034 and EN 13982. Some, but not all coveralls, will have antistatic properties, so it’s imperative that you check for the ‘lightning bolt’ pictogram, if you work in a hazardous electrical environment. By identifying these key features, you will ensure that workers and workplaces are kept safe from injury and even death.
Silica dust is estimated to cause over 230 cases of lung cancer each year in Australian workers.
PPE for respiratory protection from welding fume is commonly available in two main forms: welding...
Silica particles are much smaller than a grain of sand and are harmful to inhale into the lungs,...